Allback Linseed Oil Wax

Allback Linseed Oil Wax is made from boiled coldpressed Swedish linseed-oil and beeswax. Use as a surface protector on unpainted, varnished or painted wooden surfaces. It is easy to apply with a sponge or cloth. The surface should be clean and dry.

Use a foam rubber sponge or strong coarse cloth. Wipe off any excess after 20 minutes. Wait 2 hours then Polish the surface with a cloth.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

SKU: Allback-LOW
*
  • Natural
    Natural
  • White
    White
  • Grey
    Grey
  • Mole
    Mole
  • Black
    Black
  • Oak
    Oak
  • Brown
    Brown
  • Red
    Red
  • Mahogony
    Mahogony
*
€27.94

Sydney Paint Warehouse supply an extensive range of products using Linseed Oil.

Made from purified linseed oil and beeswax, Allback Linseed Oil Wax is an extremely versatile finish that can be used to condition and protect a wide variety of surfaces such as wood, concrete, brick, slate, furniture, metal, PVC, leather, and more. It is food safe, making it great for finishing countertops. It leaves a silky, matte, water-repellent finish, which can be cleaned with a weak solution of Linseed Oil Soap and water.

Allback Linseed Oil Wax can be applied with a rag or a stiff brush depending on the project. Leave for approximately 15 minutes to allow the oil to soak in. Use a clean rag to wipe away excess. In most cases, a single application of Linseed Oil Wax is sufficient. See the Linseed Oil Wax section of the Allback Concise Handbook for more detail. For furniture, apply Linseed Oil Wax on its own to wood, or apply over Allback Linus Interior Paint.

The linseed oil, beeswax, and pigments are all boiled together so that the beeswax incorporates as the oil dries. Dry time is approximately 24 hours under ideal conditions, but can be longer depending on environmental conditions, the thickness of the wax layer, and in other special cases such as on knots in wood with a high resin content. Be sure to wipe off excess. Once applied, the wax will take about 1 week to become completely hardened, so it is important to use the surface gently within the first week after application.

Use on:
Floors, counters, furniture, wood, masonry surfaces, PVC, and more.

Coverage:
40 sq metres (approx. 400 sqft) per litre, depending on surface finish and porosity.

Sydney Paint Warehouse supply an extensive range of products using Linseed Oil.

Made from purified linseed oil and beeswax, Allback Linseed Oil Wax is an extremely versatile finish that can be used to condition and protect a wide variety of surfaces such as wood, concrete, brick, slate, furniture, metal, PVC, leather, and more. It is food safe, making it great for finishing countertops. It leaves a silky, matte, water-repellent finish, which can be cleaned with a weak solution of Linseed Oil Soap and water.

Allback Linseed Oil Wax can be applied with a rag or a stiff brush depending on the project. Leave for approximately 15 minutes to allow the oil to soak in. Use a clean rag to wipe away excess. In most cases, a single application of Linseed Oil Wax is sufficient. See the Linseed Oil Wax section of the Allback Concise Handbook for more detail. For furniture, apply Linseed Oil Wax on its own to wood, or apply over Allback Linus Interior Paint.

The linseed oil, beeswax, and pigments are all boiled together so that the beeswax incorporates as the oil dries. Dry time is approximately 24 hours under ideal conditions, but can be longer depending on environmental conditions, the thickness of the wax layer, and in other special cases such as on knots in wood with a high resin content. Be sure to wipe off excess. Once applied, the wax will take about 1 week to become completely hardened, so it is important to use the surface gently within the first week after application.

Use on:
Floors, counters, furniture, wood, masonry surfaces, PVC, and more.

Coverage:
40 sq metres (approx. 400 sqft) per litre, depending on surface finish and porosity.

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent

Working with Linseed Oil Paint and Products

  1. Spread the paint well in several directions before the final long brushstroke.
  2. Use a stiff natural brush. Apart from shine variations, the paint should provide full coverage with one stroke. Paint at least two coats outdoors and at least three coats on very exposed areas.
  3. The paint can be used in sunshine.
  4. Use Allbäck Linseed Soap to clean brushes and hands.
  5. Store brushes hanging in a jar of raw linseed oil. This oil can be used for impregnation.
  6. The paint can be sprayed on undiluted. High pressure – small nozzle.
  7. Variations in shine can arise with uneven absorption or application. These will even out over time.
  8. The matt surface is the end result. One way of reducing variation is to impregnate with linseed oil or wipe the finished surface with linseed oil.

Instructions and article downloads

 

Customers who bought this item also bought

Allback Linseed Oil Paint

Binder : Boiled cold pressed, cleaned and sterilized linseed oil from Sweden 
Drier : Manganese
Thin with : If necessary, thin with max 5 % linseed-oil 
VOC  : <5mg/L. Nothing evaporates from the paint 
Application  : Apply thin coats with natural brush 
Cover  : 15-20 m² per litre, depending on surface 
Clean-up  : Linseed Soap and water 
Drying time  : Approximately 24 hours at room temperature. Ventilate well. 
€17.46

Allback Linseed Soap

Linseed Soap for all cleaning purposes-workshop, laundry, household and personal, as well as industrial rust protection, stain removal and paintbrush cleaning. This soap can be used like industrial pink hand cleaner for workshop purposes also.

Used as an organic cleaning solution similar to 'pink' hand cleaner found in workshops.

€27.94

Allback Raw Linseed Oil

Raw Linseed Oil perfect for glazing and filling cracks in timber.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

€27.94

Allback Linseed Putty

Linseed Putty for glazing and filling cracks in timber.

Our linseed oil putty is made from cold pressed raw cleaned and sterilized linseed oil and chalk. The putty is used for puttying windows and for filling in cracks and holes in wood. The putty should be regarded as perishable goods, but can be kept for up to one year in a sealed container. If the putty becomes hard, warm the whole package for a few seconds on full effect in a microwave oven and then knead the putty until smooth on a cold surface. Can be deep-frozen for long-term storage. Paint Shellac on all wooden surfaces that will come in direct contact with putty. You can paint direct with Allbäck Paint or after 24 hours.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

€20.96