Allback Zinc Oxide

Allback Zinc Oxide is important to ensure that you add Zinc Oxide, when applying the first coat of Allback Linseed Paint on external surfaces. This should not exceed 20% (parts per volume) of the first coat of paint. The purpose of the Zinc Oxide is to create a barrier against possible mould growth. Please ensure the paint is mixed thoroughly to avoid drying problems, its application should be worked onto the timber very thinly and thoroughly. It is only necessary to add this to the first initial coat of paint, however, it can also be added to any subsequent coats and will not greatly affect the colour of the paint if mixed correctly.

For existing painted surfaces where mould growth has become apparent, clean the surface with Linseed Soap and apply one more coat of the original paint, including Zinc Oxide.

SKU: Allback-ZO
*
$18.00

Sydney Paint Warehouse supply an extensive range of products using Linseed Oil.

When applying the first coat of Allback Linseed Paint on external surfaces, it is important to ensure that you add Zinc Oxide.  This should not exceed 20% (parts per volume) of the first coat of paint. The purpose of the Zinc Oxide is to create a barrier against possible mould growth.  Please ensure the paint is mixed thoroughly to avoid drying problems, its application should be worked onto the timber very thinly and thoroughly.  It is only necessary to add this to the first initial coat of paint, however, it can also be added to any subsequent coats and will not greatly affect the colour of the paint if mixed correctly.

For existing painted surfaces where mould growth has become apparent, clean the surface with Linseed Soap and apply one more coat of the original paint, including Zinc Oxide.

 Download Material Safety Data Sheet for Linseed Oil Zinc Oxide

Sydney Paint Warehouse supply an extensive range of products using Linseed Oil.

When applying the first coat of Allback Linseed Paint on external surfaces, it is important to ensure that you add Zinc Oxide.  This should not exceed 20% (parts per volume) of the first coat of paint. The purpose of the Zinc Oxide is to create a barrier against possible mould growth.  Please ensure the paint is mixed thoroughly to avoid drying problems, its application should be worked onto the timber very thinly and thoroughly.  It is only necessary to add this to the first initial coat of paint, however, it can also be added to any subsequent coats and will not greatly affect the colour of the paint if mixed correctly.

For existing painted surfaces where mould growth has become apparent, clean the surface with Linseed Soap and apply one more coat of the original paint, including Zinc Oxide.

 Download Material Safety Data Sheet for Linseed Oil Zinc Oxide

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent

Working with Linseed Oil Paint and Products

  1. Spread the paint well in several directions before the final long brushstroke.
  2. Use a stiff natural brush. Apart from shine variations, the paint should provide full coverage with one stroke. Paint at least two coats outdoors and at least three coats on very exposed areas.
  3. The paint can be used in sunshine.
  4. Use Allbäck Linseed Soap to clean brushes and hands.
  5. Store brushes hanging in a jar of raw linseed oil. This oil can be used for impregnation.
  6. The paint can be sprayed on undiluted. High pressure – small nozzle.
  7. Variations in shine can arise with uneven absorption or application. These will even out over time.
  8. The matt surface is the end result. One way of reducing variation is to impregnate with linseed oil or wipe the finished surface with linseed oil.

Instructions and article downloads

 

Customers who bought this item also bought

Allback Linseed Oil Paint

Binder : Boiled cold pressed, cleaned and sterilized linseed oil from Sweden 
Drier : Manganese
Thin with : If necessary, thin with max 5 % linseed-oil 
VOC  : <5mg/L. Nothing evaporates from the paint 
Application  : Apply thin coats with natural brush 
Cover  : 15-20 m² per litre, depending on surface 
Clean-up  : Linseed Soap and water 
Drying time  : Approximately 24 hours at room temperature. Ventilate well. 
$20.00