Allback Primer is specifically useful on porous surfaces: Drywall, plaster and wood. With the Allback primer you can use the exterior organic linseed oil paint even on an interior drywall or plaster surface. Can also be used with the Allback interior fire safe flat paint.

Primer for interior/exterior applications. Zero VOC. Alcohol Free. 100% Organic.

Allback Primer is used while puttying to wipe (brush) the glass clean - use a soft brush.

Raw Linseed Oil perfect for glazing and filling cracks in timber.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

Allback Shellac is simply the best product to apply to any wood knots, before you start painting with your linseed paint. Apply shellac around rebates before glazing - this prevents putty from drying out and also prevents linseed oil from affecting silicon seals on double glazing units..

Allback Zinc Oxide is important to ensure that you add Zinc Oxide, when applying the first coat of Allback Linseed Paint on external surfaces. This should not exceed 20% (parts per volume) of the first coat of paint. The purpose of the Zinc Oxide is to create a barrier against possible mould growth. Please ensure the paint is mixed thoroughly to avoid drying problems, its application should be worked onto the timber very thinly and thoroughly. It is only necessary to add this to the first initial coat of paint, however, it can also be added to any subsequent coats and will not greatly affect the colour of the paint if mixed correctly.

For existing painted surfaces where mould growth has become apparent, clean the surface with Linseed Soap and apply one more coat of the original paint, including Zinc Oxide.

Finishing Coat Brush 120 Chinese 90 tops pig´s bristle, rounded tip, rustproof tinplate, alderwood handle in the white. Cast in one piece, no water pockets.

Application: Used for finishing coat of paint when glazing and decorating

Tinplate thickness: 20 mm

Finishing Coat Brush 309 Chinese 90 tops pig´s bristle, rounded tip, alderwood handle in the white.

Application: An all-round brush for finishing coats of paint when glazing and decorating

Tinplate thickness: 9 mm

Silent Paint Remover (Speed Heater) is used and favoured by Allback in their own workshop in Sweden for removing old paint, varnish, and glue. It is fast, efficient, and safe, heating from the inside out and minimizing lead vapours and dust. It is built on Swedish design principles: high-quality and totally functional with no unnecessary parts. The Silent Paint Remover is designed for hand-held use, but the threaded attachment points at either end of the unit allow for a wide range of creative hands-free options.

The Silent Paint Remover uses infrared rays to warm paint and wood for easy stripping. The process is safe with no lead fumes and clean with little paint dust. The resulting wood surface is bare and immediately ready for priming and painting. No other paint removal method can achieve these high-quality results with so few steps. The infrared rays bring the natural wood resins back up to the wood surface to rejuvenate it. This method also reduces the risk of fire, environmental damage, and clean up time.

Small Spaces Brush 409 Chinese 90 tops pig´s bristle, straight tip, alderwood handle in the white.

Application: Used in small or limited spaces not otherwise easily reached

Tinplate thickness: 6 mm