Allback Boiled Linseed Oil

Linseed Soap for all cleaning purposes-workshop, laundry, household and personal, as well as industrial rust protection, stain removal and paintbrush cleaning. This soap can be used like industrial pink hand cleaner for workshop purposes also.

Used as an organic cleaning solution similar to 'pink' hand cleaner found in workshops.

Raw Linseed Oil perfect for glazing and filling cracks in timber.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

Allback Zinc Oxide is important to ensure that you add Zinc Oxide, when applying the first coat of Allback Linseed Paint on external surfaces. This should not exceed 20% (parts per volume) of the first coat of paint. The purpose of the Zinc Oxide is to create a barrier against possible mould growth. Please ensure the paint is mixed thoroughly to avoid drying problems, its application should be worked onto the timber very thinly and thoroughly. It is only necessary to add this to the first initial coat of paint, however, it can also be added to any subsequent coats and will not greatly affect the colour of the paint if mixed correctly.

For existing painted surfaces where mould growth has become apparent, clean the surface with Linseed Soap and apply one more coat of the original paint, including Zinc Oxide.

Linseed Putty for glazing and filling cracks in timber.

Our linseed oil putty is made from cold pressed raw cleaned and sterilized linseed oil and chalk. The putty is used for puttying windows and for filling in cracks and holes in wood. The putty should be regarded as perishable goods, but can be kept for up to one year in a sealed container. If the putty becomes hard, warm the whole package for a few seconds on full effect in a microwave oven and then knead the putty until smooth on a cold surface. Can be deep-frozen for long-term storage. Paint Shellac on all wooden surfaces that will come in direct contact with putty. You can paint direct with Allbäck Paint or after 24 hours.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

Allback Linseed Oil Wax is made from boiled coldpressed Swedish linseed-oil and beeswax. Use as a surface protector on unpainted, varnished or painted wooden surfaces. It is easy to apply with a sponge or cloth. The surface should be clean and dry.

Use a foam rubber sponge or strong coarse cloth. Wipe off any excess after 20 minutes. Wait 2 hours then Polish the surface with a cloth.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.