Allback Manganese Siccative

Allback Manganese Siccative helps the linseed oil paint dry faster.

SKU: Allback-MS
*
€27.94

Sydney Paint Warehouse supply an extensive range of products using Linseed Oil.

Sydney Paint Warehouse supply an extensive range of products using Linseed Oil.

Write your own review
  • Only registered users can write reviews
  • Bad
  • Excellent

Working with Linseed Oil Paint and Products

  1. Spread the paint well in several directions before the final long brushstroke.
  2. Use a stiff natural brush. Apart from shine variations, the paint should provide full coverage with one stroke. Paint at least two coats outdoors and at least three coats on very exposed areas.
  3. The paint can be used in sunshine.
  4. Use Allbäck Linseed Soap to clean brushes and hands.
  5. Store brushes hanging in a jar of raw linseed oil. This oil can be used for impregnation.
  6. The paint can be sprayed on undiluted. High pressure – small nozzle.
  7. Variations in shine can arise with uneven absorption or application. These will even out over time.
  8. The matt surface is the end result. One way of reducing variation is to impregnate with linseed oil or wipe the finished surface with linseed oil.

Instructions and article downloads

 

Customers who bought this item also bought

Allback Linseed Oil Paint

Binder : Boiled cold pressed, cleaned and sterilized linseed oil from Sweden 
Drier : Manganese
Thin with : If necessary, thin with max 5 % linseed-oil 
VOC  : <5mg/L. Nothing evaporates from the paint 
Application  : Apply thin coats with natural brush 
Cover  : 15-20 m² per litre, depending on surface 
Clean-up  : Linseed Soap and water 
Drying time  : Approximately 24 hours at room temperature. Ventilate well. 
€19.56

Allback Boiled Linseed Oil

Boiled Linseed Oil for diluting paint, and for maintaining painted surfaces.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

€15.37

Silent Paint Remover - Speed Heater

Silent Paint Remover (Speed Heater) is used and favoured by Allback in their own workshop in Sweden for removing old paint, varnish, and glue. It is fast, efficient, and safe, heating from the inside out and minimizing lead vapours and dust. It is built on Swedish design principles: high-quality and totally functional with no unnecessary parts. The Silent Paint Remover is designed for hand-held use, but the threaded attachment points at either end of the unit allow for a wide range of creative hands-free options.

The Silent Paint Remover uses infrared rays to warm paint and wood for easy stripping. The process is safe with no lead fumes and clean with little paint dust. The resulting wood surface is bare and immediately ready for priming and painting. No other paint removal method can achieve these high-quality results with so few steps. The infrared rays bring the natural wood resins back up to the wood surface to rejuvenate it. This method also reduces the risk of fire, environmental damage, and clean up time.

€383.49 €271.73

Allback Linseed Putty

Linseed Putty for glazing and filling cracks in timber.

Our linseed oil putty is made from cold pressed raw cleaned and sterilized linseed oil and chalk. The putty is used for puttying windows and for filling in cracks and holes in wood. The putty should be regarded as perishable goods, but can be kept for up to one year in a sealed container. If the putty becomes hard, warm the whole package for a few seconds on full effect in a microwave oven and then knead the putty until smooth on a cold surface. Can be deep-frozen for long-term storage. Paint Shellac on all wooden surfaces that will come in direct contact with putty. You can paint direct with Allbäck Paint or after 24 hours.

Warning: Thoroughly wash all rags you use to apply the oils, putty or wax to ensure they don't self-ignite as they dry.

€20.96